Back to top
Morse Code Ninja


If you have any question or comments, feel free to contact me via email. I am typically around and respond quickly. If you find this website useful, please consider sending a QSL card in the mail with a Thank you note. It is always a small joy to get a QSL card.
<Mouse over for Email address...>

Kurt Zoglmann
1310A Westloop Pl PMB 309
Manhattan, KS 66502
(Although different, the address here and on QRZ are valid.)
Donation Appreciated:

If you found my website or my YouTube channel useful, please consider making a small PayPal donation. Even $1 is helpful to offset the cost of creating videos and hosting large files for anyone to download.

3D Ninja Logo:

3D Ninja logos work-area work-area work-area I am excited to present the 3D Morse Code Ninja logo! You can download the files and print your very own today! (If you don't have a 3D printer, many public libraries offer inexpensive access to 3D printers. If that doesn't work for you, email me (<Mouse over for Email address...>), and I'll print and ship one to you at cost — $15 includes materials and shipping within the USA. It is sized to fit in a USPS Flat Rate Shipping Box — 6.41" x 4.92" x 1.18"..)

I recommend printing no smaller than about 3.54" x 2.72" x 0.65" or 90mm x 69.1mm x 16.62mm. You can scale the print arbitrarily large or small, but if you go too small, the printer won't have enough resolution, and parts of the model will be too fragile. Use your slicer to print with supports and have the Ninja's backside facing the first print layer. I print with a brim, but it isn't strictly required.